baofeng uv-5r chirp programming software

146520 or 444100, and three digits for the channel number, i.e.

Note that the numbers speak when pressed.

You can set the frequency by using the up/down buttons or by entering the frequency or channel number directly. You’ll know that the menu has exited if the radio beeps after a length of inactivity in the menu. Thus, if you’re changing several menu options in a row, it may not be necessary to press the menu key at the beginning of each operation. The radio will say “Confirm” to acknowledge a change in a menu’s parameters.Īlso be aware that the menu will stay active for a good 10 seconds after changing a menu option. Thus, after modifying a menu option, press the Menu key again to accept the change. When the Menu key is pressed, the radio will say “Menu”. There is also a “roger beep” setting that you also want to disable. It is not exactly clear what the differences are in these settings, but you want to turn them all off. There are three settings for eliminating repeater tail tones or courtesy tones. Having these on will make operating the radio annoying either to you or to the people you’re talking to. There are a couple of options that are turned on by default that it’s best to turn off. The info that follows will take you through the procedure. If you wanted to setup your transceiver via the units own keypad. You don’t have to use a PC to configure your transceiver, but it helps. I then had to download the programming software. It came complete with the USB drivers CD and the programming cable. I purchased my UV5R over the internet from a UK supplier.

Here are a few notes to get you started on your UV5R, and I hope you find these useful. Getting Started with the UV-5R Baofeng UV-5R Want a pre-programmed Baofeng with UK repeater settings installed? Service available from Prepcomm UK You can buy a Baofeng from Amazon: Baofeng UV-5R – from Amazon We’re very grateful to Steve M6UEH for putting together the following guide on how to get started with the popular Baofeng UV-5R handheld radio – hopefully, this will be of great help to first-time users of this powerful, low-priced amateur radio handheld

Baofeng uv-5r chirp programming software